Melting bath for heat pump (with heating cable)

Price range: €150.00 through €225.00

The melting bath is retrofittable and suitable for heat pumps.

Bath size 850 x 400 mm.
There is a heating cable with thermostat in the bottom of the bath. Price 150€ (incl. km)
Meltwater bath with additional 3m heating cable to be installed in the meltwater pipe. Includes 3 m insulated melt water drain pipe. Price 185€ (incl. km)

Bath size 1050 x 400 mm
There is a heating cable with thermostat in the bottom of the bath. Price 160€ (incl. km)
Meltwater bath with additional 3m heating cable to be installed in the meltwater pipe. Includes 3 m insulated melt water drain pipe. Price 200€ (incl. km)

Bath size 1250×500 mm
There is a heating cable with thermostat in the bottom of the bath. Price 175€ (incl. km)
Meltwater bath with additional 3m heating cable to be installed in the meltwater pipe. Includes 3 m insulated melt water drain pipe. Price 225€ (incl. km)

Do not install the heating cable in duplicate, and the use of a metal drain pipe is recommended.

Measurement of a flush bath

Heating cable

Clear

Toote kirjeldus

Fuser

The condensate drip tray is intended for the drainage of the condensate from the outside of the air-to-air heat pump and air-to-water heat pump (balcony, terrace, etc.). The thermostatic heating cable allows the use of the bath in winter with sub-zero temperatures.
The meltwater bath has a special adjustable fitting to suit the size of the unit and the width of the wall or ground frame.