Pellet boiler Everclean with controller 50kW

Pellet boiler Everclean 50 kW Pelltech data:

Efficiency: 95 %
Power: 50 kW
Minimum power: 20 kW
Boiler water capacity: 150 litres
Boiler weight: net/gross without water 313/323 kg
Recommended heating water temperature: 75 °C
Minimum return water temperature: 55 °C
Maximum operating temperature: 90 °C
Safety thermostat operating temperature: 95 °C
Three-way draft: 2-6 Pa
Flue gas temperature at rated capacity: 150-180 °C
Flue gas temperature at minimum power: 100-120 °C
Maximum working pressure: 2,5 bar
Test pressure: 4 bar
Fuel consumption at rated power: 6 kg/h
Fuel consumption at minimum power: 3 kg/h
Dimensions: L600 x S 800x P1510 mm
Width without side plates: 500 mm
Power supply: 230V, 50Hz
Electric power during operation: 10-38 W
Electric power when ignited: 500 W
Standby power: 3 W
Protection class: IP20
Size of the expansion tank depending on the heating system litre
Combustion air demand at full capacity per hour: > 100 m3
Optimal size of combustion air opening : 300 cm2
Ashtray capacity: 54 L
Burner mounting flange aperture: 90 mm
Fuel inlet pipe diameter: 60 mm
Number of turbochargers : 7 pcs
Flue pipe connection: 112 mm
Minimum stack diameter. 120 mm
Piston length: 604 mm.

Colour: red

* Optional electric heater 3×3 kW available.

Toote kirjeldus

Pelltech Everclean 50 is produced in Estonia

The Everclean 50 Pelltech pellet boiler is a self-cleaning boiler with high efficiency. Very good combustion quality. Fitted with smoke ventilator and low pressure sensor.

The Everclean 50 kW pellet boiler is fitted with a Pelltech PV50b burner, which provides the maximum comfort and efficiency normally expected from higher class pellet boilers.
The Everclean 50 pellet boiler has a unique vertical 2-speed design that ensures excellent combustion quality, high efficiency and long maintenance intervals.
An integrated smoke ventilator and low pressure sensor ensure clean fuel combustion regardless of the stack type and the weather outside.
Patented turbulators and automatic boiler cleaning ensure high boiler efficiency throughout the heating period.
Long maintenance intervals are ensured thanks to the very large ash container, the self-cleaning burner and the integrated and burner-controlled automatic boiler cleaning.

Everclean 50 monitoring and control equipment for pelletisers:

The main switch on the boiler can be used to switch the boiler and burner on and off.
The boiler thermostat controls the operation of the burner by switching it on and off according to the preset temperature.
The integrated temperature and pressure gauge indicate the boiler temperature and pressure.
The safety thermostat switches off the boiler, burner and electric heater when the boiler water temperature exceeds 95C. To reset the safety thermostat, remove the protective cover by turning it counter-clockwise, press the white button on the thermostat and turn the cover back into place.
The electric heater thermostat switches the heater on when the boiler temperature falls below the set point on the thermostat.
The red indicator light on the electric heater is lit when the heater is on.